Explosion-proof Flame Detectors series Spectron-600-Exd


Package price:
55 000.00  rub.
-
+
Package and accessories:
Protocol IPP:
 
You can FIND INFORMATION ON CABLE ENTRY and add a test transmitter, a power supply, and a spark protection barrier to commercial offer in the section Accessories
КорзинаГДЕ КУПИТЬ

EXPLOSION-PROOF INFRARED /ULTRAVIOLET (IR/UV) FLAME DETECTOR, HYPERSTABLE TO WELDING AND OTHER HEAVY OPTICAL INTERFERENCE

  • Spectron-601-Exd-A

  • Spectron-601-Exd-M

  • Spectron-601-Exd-N

  • Spectron-601-Exd-A-HART

  • Speсtron-601-Exd-M-HART

  • Spectron-601-Exd-N-HART

  • Spectron-601-Exd-S-M

  • Spectron-601-Exd-S-N

  • Spectron-601-Exd-S-M-HART

  • Spectron-601-Exd-S-N-HART

  • Spectron-601-Exd-A (set.8.3)

EXPLOSION-PROOF INFRARED /ULTRAVIOLET (IR/UV) FLAME DETECTOR WITH VIDEO MODULE

  • Spectron-601-Exd-A-B

  • Spectron-601-Exd-A-B-IP 

  • Spectron-601-Exd-A-B-HART 

  • Spectron-601-Exd-A-B-IP-HART 

  • Spectron-601-Exd-N-B 

  • Spektron-601-Exd-N-B-IP 

  • Spectron-601-Exd-N-B-HART 

  • Spectron-601-Exd-N-B-IP-HART 

FLAME DETECTOR IP S2000-SPECTRON-607-EXD-M/N

Addressable: S2000-Spectron-607-Exd-M/N works in two-wire circuit with S2000-CDL or S2000-CDL-2I

Detectors of the Spectron-601-Exd series detect manual arc and argon welding as false interference
They are used in fire alarm and fire suppression systems in Hazardous Area zones of classes I and II of enclosed facilities and open installations, as well as in underground excavations of mines, mining plants and their above-ground facilities.
  • The detector housing of the Spectron-601-Exd with the index "A" is made of aluminum alloy (AD31T5 eq. 6063-T5)
  • The detector housing of the Spectron-601-Exd with the index "N" is made of stainless steel (AISI 321)
  • The detector housing of the Spectron-601-Exd with the index "M" is made of galvanized steel (steel 10)

The Spectron-601-Exd detector can be equipped with a video module:

  • Index "B" - analog camera
  • index "B-IP" - digital camera

The video module is designed to record alarming events.

The video module is installed in a separate housing, mounted on the common bracket with the flame detector and located on one axis with it. The power supply to the video module comes from the flame detector via an armored cable. The separate power board is installed in the flame detector for the operation of the video module.

Photos from the analog video module are sent to the RS-485 interface located on the switching card of the flame detector and are transmitted to the receiving device using the Modbus RTU protocol at the rate of 1 photo per second. Data is simultaneously recorded and stored on an internal SD card.

The video stream from the video module IP is transmitted to the operator (to a dedicated server, recorder, etc.) via the Ethernet protocol and stored simultaneously on the internal SD card.

The Spectron-601-Exd-A (set 8.3) – special version of the detector with individual settings. It is supplied complete with a sun shield SZK-20, cable glands for cable installation in a metallic hose pipe with a nominal diameter of 20 mm (4 pcs), plugs (3 pcs), resistors for connection to an expansion module (S2000-AR2), an explosion-proof junction box Relion-KKV-A.
The detector in a stainless-steel housing is recommended for use in facilities, under conditions of acidic, alkaline, etc. chemically aggressive media, sea water and salt fog.
The element base of the device is equipped with a three-stage lightning protection, which makes it possible not to use additional equipment for overvoltage protection.

The "Spectron" configuration program is used to configure the detector operation. The program allows:

  • to poll the status of the detector;
  • to restart the detector;
  • to change the additional settings of the detector parameters.

In detectors with the HART protocol - together with the HART-USB interface converter "Spectron". The software is available for downloading at the link from our website.

In detectors without the HART protocol (with the digital Modbus/RTU protocol) - together with the SB-RS-48 interface converter. The software is available for downloading at the link from our website.

For facilities with complicated operating conditions, the detector sensitivity can be switched over.  Detection range in modes:

  • "Far" – TP-5, TP-6 – 50 meters;
  • "Standard" – TP-5, TP-6 – 25 meters;
  • "Near 2" (factory setting) – TP-5, TP-6 – 17 meters;
  • "Near 3" – TP-5, TP-6 – 12 meters.

The heating of the detector ensures the proper operation of the device at ambient temperatures from

 -70 to +90 °C. In case the detector heating up is disabled, the temperature range counts from -55 to +90 ° C. The detector remains operability with a short-term temperature increase up to +135 ° C

The field of view of the Spectron-601-Exd detectors remains in a vertical, horizontal and all inclined planes, and corresponds to 90º.
The flame detection range corresponds (according to GOST R 53325-2012) – 50 meters - TP5 and TP6

Flame detector Spectron-601-Exd

A

M

N

S-M

S-N

Connection

Self monitoring

Index of protection

in accordance with GOST 14254 (IEC 60529:2013)

Type of ex-proofing


Exd


Exd


Exd


Exd


Exd

Flame detector Spectron-601-Exd

M-HART

N-HART

S-M-HART

S-N-HART

Connection

Self monitoring

Protecting cover
in accordance with GOST 14254

Type of ex-proofing


Exd


Exd


Exd


Exd

NOTES. The model of cable glands must be compulsory specified when including into the specification and ordering equipment. Cable glands are not included in the equipment cost. The complete information of cable glands is available on the page of  our website CABLE GLAND. If you have any questions about the correct selection of the cable gland type, you can contact customer service by phone.
 

Easy design process is ensured with specialized software  Spectron-OPS-AutoCAD.

The device warranty period is 18 months from the date of commissioning, but not more than 24 months as from the date of release by the manufacturer.

Detectors with a release date of 2017 and later work with explosion-proof transmitters:

  • IT-12-Exd (black) - test transmitter for remote testing of detector operation availability;
  • IT-12-Exd (red) - adjustable transmitter for remote modification of detector parameters.

The range of the transmitters is 25 meters.

To buy the S2000-Spectron-607-Exd, please contact "Bolid innovation and research enterprise "

Fire-alarm flame detectors Spectron-601-Exd are included in the nomenclature reference book of materials and equipment of Gazprom JSC