Spark protection barrier Spectron-IB-01/02

The spark barrier is an active device and is installed outside the explosive zone.

• Spektron-IB-01 – spark barrier for power supply circuits of OPS devices and other technical devices
• Spektron-IB-02 – spark barrier for SHS outputs of receiving and control devices
• S2000-Spectron-IB – spark barrier for the CDL DPLS circuit in the ORION NVP "Bolid" address system

The output explosion-proof circuits of the spark barrier are marked [Ex ia I Ma]/[Ex ia Ga] IIC and provide the electrical circuits with the type of explosion protection "intrinsically safe electrical circuit"

Low current consumption allows you to power the spark barrier from the line without additional power sources

Over-current protection in an intrinsically protected circuit is provided by tripling the active current protection cell

The small transient resistance of the spark barrier allows you to control the short circuit of the circuit

The spark barrier is intended only for unipolar (not alternating) connection of a loop or a power line

The spark barrier S2000-Spektron-IB provides explosion protection of the line, with full preservation of the signals transmitted over the DPLS. Address fire detectors with the type of explosion protection "Intrinsically safe electrical circuit" can be connected to an intrinsically safe DPLS

The spark barrier With 2000-Spectron-IB does not limit the electrical parameters of the outputs of the CDL DPLS. The maximum number of detectors in an intrinsically safe DPLS is determined by the output current of the CDL – 60 mA (for long-term load), 100 mA (maximum current for short-term load)

Temperature range 

-40 to +60 ºС

The degree of protection of the shell according to GOST 14254

Type of explosion protection of intrinsically safe output

For the convenience of design, a specialized program is used Spectron-OPS-AutoCAD

The warranty period of operation is 18 months from the date of commissioning, but not more than 24 months from the date of release by the manufacturer

To purchase the S2000-Speсtron-IB, you should contact NVP Bolid

Spectron-IB-01

Spectron-IB-02

S2000-Spectron-IB

Appointment

Power supply chains

PPK Alarm Loop

DPLS

Marking of the explosion protection of the output

[Ex ia I Ma]/[Ex ia I Ga] IIC

Maximum input voltage of the circuit (Um), V

12,5

24,5

15,5

12

24

15

Maximum output current of the spark barrier (Iоi), mA

500

100

140

Maximum output power (Po), W

6,0

2,4

2,1

Consumption current, no more than, mA

Maximum external capacitance (Coi), uF

Maximum external inductance (Loi), mH

Number of channels

1

Temperature range, ºС

–40 ÷ +60

The degree of protection by the shell according to GOST 14254, not less

IP42

Throughput resistance, no more than, Ohm

5,1

Overall dimensions, mm

91x54x57

100

Housing material