Annunciator light running line TSVG-Exi/Exm-M/N-Prometheus

An explosion-proof light annunciator (board) is used as a warning light or information board in fire alarm and fire extinguishing systems in explosive zones at closed facilities and open installations, and can also be used in underground mines, mines and their surface structures

• TSVG-Exm-M/N-Prometheus - for explosive zones of classes "1" and "2"
• TSVG-Exi-M/N-Prometheus - for explosive zones of classes "0", "1" and "2"

The siren can be used as information signs and displays.

Annunciator body material:

• TSVG-Exm-M-Prometheus - from sheet low-carbon steel with a powder polymer coating;
• TSVG-Exi-M-Prometheus - from sheet low-carbon steel with a powder polymer coating;
• TSVG-Exm-N-Prometheus - stainless steel;
• TSVG-Exi-N-Prometheus - stainless steel

The siren has a color programmable text field. The text font and text field background can have the following colors: red, green, blue, yellow, cyan, purple, white, black.

The siren is equipped with 2 control signal inputs. For each input, you can program an individual inscription on the scoreboard. Labels may differ in font and background colors, number of lines, and static character. Example: inscription 1 can be static, and inscription 2 - flashing or "creeping line".

The software allows you to adjust the speed of the "creeping line".

The siren communicates with the PC via the RS-485 interface. To connect the siren to a PC, a USB-RS-485 converter is required. The converter is not included in the siren kit.

The high degree of protection of the IP66 / IP68 shell ensures the use in conditions of strong dustiness, in damp and damp rooms, in open areas with wind and precipitation.

Annunciator power supply:

• DC voltage from 12 to 36 V;
• AC voltage from 12 to 28 V;
• AC voltage 220 V.

Connecting the siren:

• 2-wire - turns on when power is applied;
• 4-wire - when the power is permanently connected, the siren switches to the "Alarm" mode when a control signal is received.

The siren meets the requirements for explosion-proof equipment and corresponds to the explosion protection marking:

• TSVG-Exm-M/N-Prometheus – РВ Ex eb mb I Mb X / 1Ex eb mb IIC T6 Gb X  
• TSVG-Exi-M/N-Prometheus – PO Ex ia I Ma X / 0Ex ia IIC T6 Ga X / Ex ia IIIС T85°C Db Х

When installed in mines and mines, the power supply is not higher than 12V

Operating temperature from -70 to +85 ºС

Annunciator

Type of explosion protection

Exm

Exi

The board complies with the relevant regulations for immunity to radio and electromagnetic interference group 4

The light signal of the explosion-proof display is clearly distinguishable from a distance of 15 meters with outdoor illumination up to 500 lux

User selection of the board state in different modes:

• in the "Standby" mode, the status of the display is: disabled or permanently lit;
• in the "Fire" mode, the state of the board: constant glow, flashing or running line.

Galvanic isolation of power circuits and control circuits of the siren

Warranty for the device is 18 months, but not more than 24 months from the date of issue by the manufacturer.

12÷36 DC,

12÷28 АС

220 АС

12÷36 DC,

12÷28 АС

at supply voltage 12 В

at supply voltage 24 В

at supply voltage 36 В

at supply voltage 220 В

600

300

200

35

15

Light indication in the "STANDBY" mode

Сable entry

6

-70 ÷ +85

Type of climatic modification

UHL1

IP66/IP68

908х190х39