EXPLOSION-PROOF BOX SPECTRON KV-EXD-A FROM ALUMINUM
Explosion Proof Aluminum EXD Box:
- Spectron-KV-Exd-A 302х276х119
- Spectron-KV-Exd-A 302х276х189
- Spectron-KV-Exd-A 441х356х196
- Spectron-KV-Exd-A 441х356х266
- Spectron-KV-Exd-A 570х370х240
- Spectron-KV-Exd-A 570х370х300
Explosion-proof box Spectron-KV-Exd-A refers to stationary devices and is designed to accommodate switching, transmitting, receiving, monitoring, control and other electrical equipment and devices in explosive areas |
||
Explosion protection marking 1Ex d IIC T3/T4/T5/T6 Gb (except acetylene) / Ex tb IIIC T85°C…T200°C Db allows the box to be used in explosive zones "1" and "2" classes indoors and outdoors outside premises |
||
Body material - aluminum alloy with polymer powder coating. Recommended for use in non-corrosive environments |
||
The highest degree of dust and water resistance IP66/IP68 |
||
The box has the highest strength characteristics |
||
A wide range of dimensions of the explosion-proof box body is offered, which allows you to choose a design for the most efficient use of its internal space |
||
Insulated boxes with heating are produced for outdoor use outdoors. |
||
The lid of the box has a seal around the perimeter and is fastened with galvanized steel pan head bolts with a hexagon socket wrench |
||
For ease of installation and maintenance, the cover is additionally supported on the body using hinged loops. |
||
The number and location of cable glands is specified when ordering. See table 2 (SPECIFICATIONS tab) for the maximum number of entries for each side of the box. Cable glands are not included in the price of the box, the full price of the product with cable glands is specified when ordering |
||
The box is equipped with a mounting plate for equipment installation |
||
The degree of protection by the shell according to GOST 14254 |
||
Type of explosion protection |
Exd
|
|
The following equipment is available for installation:
|
||
There are places for grounding connection - on the outer wall, on the inner wall and on the inside of the box cover |
||
The base of the box has 4 mounting lugs for wall mounting (large boxes have 6 mounting lugs). Die-cast aluminum boxes are supplied with lugged steel mounting brackets that attach to the bottom of the box |
||
The warranty period of operation is 18 months from the date of commissioning, but not more than 24 months from the date of release by the manufacturer. |