Spectron 535-Exi Series Manual Call Points
EXPLOSION PROOF MANUAL CALL POINT
-
Spectron-535-Exi-UDP-01
- Spectron-535-Exi-UDP-02
- Spectron-535-Exi-UDP-03
-
Spectron-535-Exi-UDP-01 type 01
- Spectron-535-Exi-UDP-02 type 01
- Spectron-535-Exi-UDP-03 type 01
-
Spectron-535-Exm-UDP-01
- Spectron-535-Exm-UDP-02
- Spectron-535-Exm-UDP-03
-
Spectron-535-Exm-UDP-01 type 01
- Spectron-535-Exm-UDP-02 type 01
- Spectron-535-Exm-UDP-03 type 01
Spectron-535-Exi\Exm-UDP explosion-proof manual call point is designed for manual control of extinguishant release, smoke extraction, warning and evacuation systems. Produced in the following versions:
|
||
The explosion protection marking allows the devices to be used in hazardous areas zones 0, 1 and 2 of enclosed facilities and outdoor installations. |
||
|
||
Temperature range is from -60 to +70 ºС. |
||
Environmental Standards in accordance with GOST 15150: UHL1, OM1 |
||
The absence of magnets in the design of the device increases its reliability and allows the call point to be installed in areas with a high magnetic field |
||
The resetting of the call point to its original state (Normal mode) is carried out using a special key. |
||
Self-testing increases the reliability of the fire system. |
||
ATTENTION. The model of cable glands must be specified when adding to the specification and ordering the equipment. Cable glands are not included in the price of the equipment. Full information on cable glands is available on the CABLE GLAND page of our website . If you have any questions about the correct selection of the type of cable gland, you can contact the technical support service by phone. |
||
Spectron-535-Exi-UDP-01/02/03 |
Spectron-535-Exm-UDP-01/02/03 | |
Wiring | ||
Ingress Protection by the housing in accordance with GOST 14254 | ||
Type of explosion protection |
|
Exm |
Spectron-535-Exi-UDP-01/02/03 type 01 |
Spectron-535-Exm-UDP-01/02/03 type 01 |
|
Wiring | ||
Ingress Protection by the housing in accordance with GOST 14254 | ||
Type of explosion protection |
Exi |
Exm |
Specialized program Spectron-OPS-AutoCAD for easier designing |
||
The warranty period of is 18 months from the date of commissioning, but not more than 24 months from the date of manufacturing. |
or by e-mail: support@spectron-ops.ru