Light and sound annunciator TSZV-Exi/Exm-M/N-Prometheus-MINI

An explosion-proof light and sound annunciator (panel) is used as a light and sound warning device in fire alarm and fire extinguishing systems in explosive zones at closed facilities and open installations, and can also be used in underground mines, mines and their surface structures

• TSZV-Exm-M/N-Prometheus-MINI - for explosive zones of classes "1" and "2"
• TSZV-Exi-M/N-Prometheus-MINI - for explosive zones of classes "0", "1" and "2"

The siren can be used as information signs and displays. It has minimal overall dimensions

Annunciator body material:

• TSZV-Exm-M-Prometheus-MINI and TSZV-Exi-M-Prometheus-MINI - from low-carbon steel sheet with a powder polymer coating;
• TSZV-Exm-N-Prometheus-MINI and TSZV-Exi-N-Prometheus-MINI are made of stainless steel.

The high degree of protection of the IP66 / IP68 shell ensures the use in conditions of strong dustiness, in damp and damp rooms, in open areas with wind and precipitation.

Annunciator power supply:

• DC voltage from 12 to 36 V;
• AC voltage from 12 to 28 V;
• AC voltage 220 V.

Connecting the siren:

• 2-wire - turns on when power is applied;
• 4-wire - when the power is permanently connected, the siren switches to the "Alarm" mode when a control signal is received.

The siren meets the requirements for explosion-proof equipment and corresponds to the explosion protection marking:

• TSZV-Exm-M/N-Prometheus-MINI – РВ Ex eb mb I Mb X / 1Ex eb mb IIC T6 Gb X  
• TSZV-Exi-N-Prometheus-MINI – PO Ex ia I Ma X / 0Ex ia IIC T6 Ga X / Ex ia IIIC T85°C Db Х

When installed in mines and mines, the power supply is not higher than 12V

Operating temperature from -70 to +85 ºС

Exm

Exi

The degree of protection by the shell according to GOST 14254

The board complies with the relevant regulations for immunity to radio and electromagnetic interference group 4

The light signal of the explosion-proof display is clearly distinguishable from a distance of 15 meters with outdoor illumination up to 500 lux

Light signal flashing frequency 1 Hz

Sound pressure level at a distance of 1 m, not less than 100 dB

User selection of the board state in different modes:

• in the "Standby" mode, the status of the display is: disabled or permanently lit;
• in the "Fire" mode, the state of the display: constant glow or flashing;
• in the "Fire" mode, the choice of one of the 4 tones of the sound signal

The background color (font) and the inscription on the siren board are selected when ordering

Possibility to control the power supply loop of the siren via the control loop

Galvanic isolation of power circuits and control circuits of the siren

Warranty for the device is 18 months, but not more than 24 months from the date of issue by the manufacturer.

12÷36 DC,

12÷28 АС

220 АС

12÷36 DC,

12÷28 АС

at supply voltage 12 V

at supply voltage 24 V

at supply voltage 36 V

at supply voltage 220 V

170

85

56

9,2

Connection

1

100

The light signal of the explosion-proof display is clearly distinguishable from a distance, meters, with outdoor illumination up to 500 lux

15

2,9

-70 ÷ +85

UHL1

IP66/IP68

380х170х45